Cisco Wireless-N Access Point with Power over Ethernet (WAP121-E-K9-G5)

Standards: IEEE 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Port: LAN Fast Ethernet auto sensing, DC jack
Switch: Power button (on/off)
Buttons: Power (on/off) push button, Reset button
Cabling type: Category 5e or better
Antennas: Internal antennas optimized for wall, ceiling, or desktop placement
LEDs: Power, WLAN, LAN
Operating system: Linux
Ports: 10BASE-T/100BASE-TX Ethernet, 12V DC power with support for 802.3af PoE
Power supply: External 12V 0.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af PoE
Buttons: Power (on/off) push button; Reset button
Lock slot: Slot for Kensington lock
LED: Power, Wireless, Ethernet
Physical dimensions (W x D x H): 4.89 x 4.89 1.38 in. (124.17 x 124.17 x 35 mm)
Weight: 0.37 lb or 168 g
PoE: 802.3af
Peak PoE power: 6W
VLAN support: Yes
Number of VLANs: 1 management VLAN plus 4 VLANs for Service Set ID (SSID)
Multiple SSIDs: 4
802.1X supplicant: Yes
SSID to VLAN mapping: Yes
Auto channel selection: Yes
Spanning tree: Yes
Load balancing: Yes
IPv6: Yes
IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2: 802.1Q-based VLANS, 4 active VLANS plus 1 management VLAN